聯系我們
電話：020-36703438
傳真：020-36703488
郵箱：ccsopower@163.com
地址：廣州市白云區夏花二路29號（舊廣花路段）
蓄電池槽式化成工藝 |
| 將蓄電池正、負極板相間地插入化成槽內，相同極性的極板連成一邊，形成多極板（正極群與負極群）的“蓄電池”�；刹蹆�(nèi)盛有大量電解液，電解液相對密度d 為1. 04 -1.18 的硫酸溶液。接通外電源，電流通過極板，經過一定時間后，這一過程完成，取出極板，用水洗滌極板上殘留的硫酸溶液，然后進行極板干燥，要在防氧化條件下嚴格控制進行負極干燥，這是通常生產干式荷電電池極板的方式。
Will positive, the anode plank alternately insert to become inside the slot, the same alike the most sexual pole plank connect become a part, form much and very "battery" of plank(cathodes and anodes).Become prosperous have a great deal of electrolyte inside the slot, electrolyte opposite density d is 1.04-1.18 sulfuric acid aquas.Connect a dispatches from foreign news agency source, the electric current passes pole plank, after certain time, this process completion, take out pole plank, with water wash away dirt pole plank up remain of sulfuric acid aqua, then carry on pole plank aridity, strictly control to carry on anode aridity under the sistuation that defend to oxidize, this is to usually produce a stem type lotus electricity battery pole knothole method. |
-> 蓄電池閱讀相關文章 |
| 1 蓄電池成為今后20年最有發展前景的行業之一 |
| 2 蓄電池的巨大前景 |
| 3 現今蓄電池的使用狀況 |
| 4 蓄電池叉車的特點及市場分析 |
| 5 說說電動汽車為什么不宜用家用電源充電 |