對于采用AGM隔板的電池（VRLA）極板的組裝間距等于或略小于極板厚度，這是因?yàn)?SPAN lang=EN-US>AGM隔板作為“電解液庫”，應該比較大，以保持有足夠多的電解液量，從而確保在一定放電率條件下放電容量的要求，極板的水平方向與垂直方向可有較大的變化范圍，但對于極板高度與極板間距的比例則有一些限制，也就是說對于給定的極板間距，存在蓄電池應有多高才達到優異性能（如注液性能等）的限值。因?yàn)樵谒⑷说碾娊庖贺灤╇姵貥O群時，酸會被消耗，所以流過的垂直距離越大，則酸的消耗也越大。
For adoption AGM separate knothole battery(VRLA) pole knothole construction be apart from and equal or is more slightly small than pole plank thickness, this because AGM separates plank as "electrolyte database", should relatively greatly have by keeping enough much amount of electrolyte and thus ensure to turn on electricity the request of the capacity under the sistuation that definitely turn on electricity a rate, pole knothole level the direction and perpendicular direction can have bigger variety scope, but for pole plank highly with pole plank the proportion for being apart from then have some restrictions, is also say for give settle of the pole plank be apart from and exist storage battery should have much Gao just attain excellent function(if note liquid function etc.) of limit value.Because pierce through a battery pole at the person's electrolyte noted cluster, sour will be consumed, so flow through of perpendicular distance more big, the sour depletion then is also more big. |
